Skip to content
{ 2014 07 29 }

HDMI2USB – Production Board Bring Up – Day 8 (28th July 2014)

  • Updated the HDMI2USB variant spreadsheet with new Numato board pin out.
  • Successfully generated a HDMI2USB firmware for Numato board with new pin information. That fixes the constraint issue!
  • Successfully generated a HDMI2USB firmware for Numato board with second receive port (RX2) disabled!
    • Was able to view the HDMI2USB test image output on TX2!
    • Was able to capture the HDMI2USB test image via mplayer!
    • Was unable to detect a screen on RX1.
  • Created a “flash.sh” script to use libFPGALink to flash the FPGA and then load the Cypress firmware.
  • Wrote a Python script to interrogate the CDC serial port for status of the firmware.
Posted by mithro on Tuesday, July 29, 2014, at 12:13 am. Filed under HDMI2USB, TimVideos.us. Follow any responses to this post with its comments RSS feed. Comments are closed for this post.